Technical Information - Reloop RMP-3a Instruction Manual

trOuBELSHOOtING
If you should encounter any kind of trouble with the RMP-3 please check the following chart for the
corrersponding symptoms and follow the instructions that are listed.
Symptoms
• No power when activating the power ON/OFF switch.
• the CD replay does not start.
• No sound.
• CD skips.
• Humming sound.
possible cause
• poor mains plug connection.
• the CD is upside down in the tray or it is soiled.
• Output cable is wrong or not correctly connected, wrong amplifier or mixing console operation.
• the CD player is continuously exposed to vibrations and shocks for longer than 20 seconds.
• Loose cable connections.
Corrective Measures
• Check the mains plug connection.
• Insert the CD with the label showing upwards.
• Check the output cords' connections and the settings of your amplifier and mixer respectively.
• Install your system in another location.
• Check all sound plugs.

tECHNICaL INFOrMatION

Global Distribution GmbH did not check the following manufacturer's data for plausibility and accuracy:
Frequency response:
Channel separation:
S/N ratio:
D/A converter:
MP3 Formats:
Maximum MP3 folders:
Maximum MP3 files:
Dimensions:
Weight:
52
CD: 17 Hz - 20 kHz / USB: 17 Hz – 16 kHz
85 dB
90 dB
8-fold/1 Bit
MPEG 1 Layer 3 standard
MPEG 2 Layer 3 standard
MPEG 2.5 Layer 3 standard
CD: 255 / USB: 999
CD: 999 / USB: 999 (each folder)
320 x 112.6 x 340 mm
3.43 kg