Reloop RMP-3a Instruction Manual page 34

H) BpM Status
Indicates if the Auto BPM Counter (display reads „Auto BPM") or manual BPM Counter (display
reads „BPM" only) is activated.
I) BpM Display
Indicates the current BPM value of the track.
J) Dot Matrix Information Display
Indicates the name of the folder, file, album, genre, artist and title while playing an MP3 CD with
ID3 TAG or an audio CD with CD text. To change between the name of a folder, artist and title of an
MP3-CD, press the Track Wheel -4-. This information display animates a virtual disc which shows the
direction in which the CD turns and if the Jog Wheel has been touched while in Scratch mode. While
in the pre-set menu, the necessary settings are made in the Dot Matrix Information Display.
K) CuE
Indicates if the player is in Cue mode (the display reads „Cue").
L) pause
Indicates if the player is in Pause mode (the display reads „||").
M) Direction
Indicates if the player is in Forward or Reverse mode.
N) CD/Mp3 Mode
Indicates if an audio CD (the display reads „CD") or an MP3-CD (the display reads „MP3") is playing.
O) auto-Cue Status
Indicates if Auto-Cue is activated (the display reads „Auto Cue"). To de-/activate Auto-Cue press
and hold the Single/Continue button -8- for two seconds.
p) play Mode
Indicates if the player is in Single mode (the display reads „Single") or in Continue mode (nothing
on display).
Q) reloop
Indicates if the player has stored a loop which can be prompted with the Reloop button -14- (the
display reads „Reloop"). When „Reloop" flashes, the loop is active.
12. Loop In Button
Activate the Loop In Button -12- to set the start point of a loop (endless loop) and also to set a
current Cue Point. In order to newly set the Loop-In point push the Loop In Button while the loop is
activated.
13. Loop Out Button
Activate the Loop Out Button -13- to set the end point of a loop (endless loop). If the Loop In Button
was previously activated, the player goes into the Loop mode (seamless loop) - the display reads
„Reloop". To exit the loop, press the Loop Out Button again.
>>For more information about loops go to the chapter entitled „Sampling".
In order to newly set the Loop Out point push and hold the Loop Out Button for approximately 2
seconds. Now you can shorten and lengthen the Loop Out point by turning the Jog Wheel.
14. reloop Button
Press the Reloop Button -14- for the player to return to the last loop that was played. To exit the
loop, press the Loop Out Button again.
>>For more information about loops go to the chapter entitled „Sampling".
15. CuE/Sample Banks 1-4
When in Play mode, the Cue/Sample Banks 1 to 4 -15- can be used as Hot Cue buttons. Once the
Sampler mode has been activated by using the Sampler Button -17- the player will play samples from
the banks simultaneously with the playback. For every bank, a 5-second sample can be saved and
played back. Press one of the respective Bank Buttons 1 to 4 to trigger the previously stored Cue
Points or samples.
>>For more information about loops go to the chapter entitled „Sampling".
34