Phase Button - Reloop RMP-3a Instruction Manual

NOtE:
as soon as the time or ratio Buttons are activated, the Scratch mode is temporarily deactivated.
tIp:
to create a great filter sweep effect, set the time parameter value to „0" mSec. and activate
„Hold". use the parameter ratio Button and the Jog Wheel to infinitely filter the frequency of
your track from the value „0" (High pass Filter) to the value of „255" (Low pass Filter).

30.phase Button

Use the Phase Button -30- to activate the phase effect. Although similar to a flanger, it emphasises
the upper pitch less and sounds slightly more harmonious.
Your device synchronises the effects automatically with the current BPM. Use the Beat link Buttons
-36- to modify the frequency to match the beat. To manually change the beat frequency of the ef-
fect, press the Parameter Time Button -25- and regulate the frequency value using the Jog Wheel
(von 0 - 9990 mSec.). To influence the intensity of the effect, press the Parameter Ratio Button -26-
and set the volume with the Jog Wheel (from 0 – 255).
NOtE:
as soon as the time or ratio Buttons have been activated, the Scratch mode is temporarily
deactivated.
31. Hold Button
When activating the Hold function with the button -31- your player maintains the set effect frequen-
cy. Otherwise, the effect value always returns to the original value.
attENtION:
the original value can be independently defined. For this, activate the Hold function -31- and set
the desired valued. When deactivating the Hold function and changing the Frequency/Intensity
value, the value will automatically jump to the defined original value.
32.Echo Button
Use the Echo Button -32- to activate a Reverb/Delay effect. Your device synchronises the effects
automatically with the current BPM value. Using the Beat Link Buttons -36-, you can precisely set
the frequency to match the beat.
To manually change the beat frequency of the effect, press the Parameter Time Button -25- and
regulate the frequency value using the Jog Wheel (from 0 - 2000 mSec.). To influence the intensity
of the effect, press the Parameter Ratio Button -26- and set the volume using the Jog Wheel (from
0 – 255).
NOtE:
as soon as the time or ratio Buttons have been activated, the Scratch mode is temporarily
deactivated.
tIp:
the Echo effect sounds best if synchronous with the beat. Ideally, use the Beat Link Buttons -36-
to vary the length of the effect.
33. Flanger Button
Use the Flanger Button -33- to activate the flanger effect. This frequently applied effect is similar to
the Phase effect, but slightly more harmonious, emphasises the upper pitch more and is reminiscent
of a flying aircraft. Your device synchronises the effects automatically with the current BPM value.
Use the Beat Link Buttons-36- to precisely set the frequency. To manually change the beat frequen-
cy of the effect, press the Parameter Time Button -25- and regulate the frequency value with the
Jog Wheel (from 0 - 9990 mSec.).
To influence the intensity of the effect, press the Parameter Ratio Button -26- and set the volume
with the Jog Wheel (from 0 – 255).
NOtE:
as soon as the time or ratio Buttons have been activated, the Scratch mode is temporarily
deactivated.
tIp:
the Flanger effect is best when set to 4/1 beat with the Beat Link Button.
37