Reloop RMP-3a Instruction Manual page 51

3. Connecting two rMp-3 players for the audio Link Mode
player 1 (Master) = RMP-3 connected to the USB data carrier
For the master player select „USB = LINK" in the submenu.
Path: push Time + Track Buttons > Item C. MIDI SET > USB = LINK
Hold the Shift Button -46- and turn the Track Wheel -4- in order to switch modes.
• Connect the uSB data carrier to the upper uSB port -47-.
• Connect the uSB media port on the rear of the first player -49- to the uSB data port -47- of the
second player.
NOtE!
It is recommended to use a uSB cord which is no more than 1 meter.
Now you can access the USB drive of the first player (master) by using the second player in USB
mode.
NOtE!
pleas also refer to the chapter „Submenu", item 2. playlist regarding sorting and search func-
tions.
51