Table of Contents
Advertisement
WAN Service
This screen provides a summary of the current WAN interfaces you have configured. If you have connected the NB604 to an ADSL
connection through the ADSL Quick Setup interface, details of the connection will be summarized here. You can also add or
remove WAN Services.
To remove a currently configured WAN Service, Click the remove checkbox corresponding to the chosen service and click Remove.
To create a new WAN Service connection:
1.
Click Add.
2.
Select a currently unused ATM interface
3.
Select the connection type and enter a description for the WAN Service.
4.
Select to enable IPv6 support for the connection (if needed).
5.
Enter the connection settings applicable for the connection type.
YML604X
www.netcommwireless.com
NetComm NB604 – ADSL2+ Modem Router
20
Advertisement
Table of Contents
