Option Installation Flow Chart - Ricoh Aficio AP610N Quick Installation Manual

Installing Options

Option Installation Flow Chart

We recommend you install multiple options in the following order:
A
Attach the paper feed unit (Paper Feed Unit Type 610).
Attach the paper feed unit to the bottom of the printer.
You can attach up to two paper feed unit. Up to 1750 sheets of paper can be
loaded.
B
Attach the envelope feeder (Envelope Feeder Type 610).
3
Replace the paper tray of the optional feeder with the envelope feeder.
C
Install the SDRAM module (Memory Unit Type C 256MB).
Install the module to the SDRAM module slot on the controller board.
D
Install the 1394 interface unit, 802.11b interface unit or Bluetooth interface
unit.
Install the 1394 interface unit, 802.11b interface unit or Bluetooth interface
unit on the controller board.
The 1394 interface unit, IEEE 802.11b interface unit or Bluetooth interface unit
cannot be used at the same time.
One of the following can be installed:
• 1394 Interface Unit Type 4510
• 802.11b Interface Unit Type F
• Bluetooth Interface Unit Type C
E
Install the hard disk drive (Hard Disk Drive Type 2600).
Install the hard disk drive to the controller board.
F
Install the Network Data Protection Unit Type B.
Insert the network data protection unit into the SD card slot on the controller
board.
G
Attach the duplex unit (Duplex Unit AD610).
Attach the duplex unit to the rear of the printer.
30