Ricoh Aficio AP610N Quick Installation Manual page 113

C
To set the paper size and feed di-
rection, Press the {Menu} key.
The [Menu] screen appears on the
display.
D
Press the {U} or {T} key to dis-
play [Paper Input], and then press
the {# Enter} key.
Menu:
Paper Input
The paper selection menu appears.
E
Check [Bypass Size] appears, and
then press the {# Enter} key.
The paper size selection menu ap-
pears.
F
Press the {U} or {T} key to dis-
play the size and orientation of
the paper in the bypass tray.
Bypass Size:
*A4 (210 x 297)
After about two seconds, the dis-
play returns to the menu.
G
Press the {Online} key.
The initial screen appears.
Note
❒ To load thick paper, OHP trans-
parencies, or envelopes, make
settings for thick paper or OHP
transparencies using the control
panel and printer driver.
❒ The number of pages that can be
loaded in the bypass tray differs
depending on paper type. Make
AGN200S
sure paper is not stacked above
the paper guides inside the by-
pass tray.
Reference
For details about control panel
settings for custom size paper or
special paper, see p.24 "Specify-
ing custom size paper for the
Bypass Tray".
For control panel settings when
using thick paper, OHP trans-
parencies, or post cards, see
p.25 "Specifying a paper type
for the Bypass Tray".
Loading Paper
1
23