Ricoh Aficio AP610N Quick Installation Manual page 150

Troubleshooting
Messages
/Second messages
Replace
Toner Cartridge
Reset Duplex
Unit correctly
Reset Toner
Cartridge
5
Reset Tray #
or Form Feed
Resetting Job...
ROM Update
Waiting for Data
ROM Update
Receiving Data
SC XXX-X
Power Off On
If Error Reoccur
Call Service
Supply order
failed
SD authenticatn
failed
Setting change
in process
60
Description
The toner cartridge is not set
correctly or toner is almost run
out.
The toner dust is full.
A communication error sent
from the system unit to the du-
plex unit.
The toner cartridge is not set
correctly.
The toner cartridge is not set in-
stalled.
The indicated paper input tray
is not set correctly, or not set.
#: tray number
The print job is being reset.
The printer is waiting for up-
dated data.
The printer is receiving updat-
ed data.
An error has occurred.
Supply order has failed.
Authentication for the SD card
has failed.
A setting change is currently in
process on the computer side.
Solution
Set the toner cartridge correctly.
See p.31 "Replacing the Toner Car-
tridge".
Prepare a new toner cartridge. If the
image density gets too light, replace
the toner cartridge with a new one.
See p.31 "Replacing the Toner Car-
tridge".
Set the duplex unit correctly. If the
problem persists, call your service
provider.
Set the toner cartridge correctly.
See p.31 "Replacing the Toner Car-
tridge".
If the cartridge is installed, close the
front cover and turn the off power
switch and then on. If the message ap-
pears again, contact your sales or
service representative.
Set the indicated paper input tray cor-
rectly.
Wait for a while.
Don't turn off the printer while it is
waiting for data.
Don't turn off the printer while it is re-
ceiving data.
Turn the power off, and then on. If the
message appears again, contact your
sales or service representative.
The use is required to reset the job.
Turn the power off, and then on. If the
message appears again, contact your
sales or service representative.
The user must wait until the change is
complete.