Ricoh Aficio AP610N Quick Installation Manual page 211

Preparing for Printing
G
Select the name of the printer whose driver you want to install, and then
click [Next].
H
In the [Available ports:] box, click [Printer Port], and then click [Next].
I
Change the printer name if you want, and then click [Next].
Select the [Yes] check box to configure the printer as default.
J
Specify whether or not to print a test page, and then click [Finish].
K
On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
L
Click the icon of the printer you want to use. On the [File] menu, click
[Properties].
M
On the [Details] tab, click [Add Port...].
N
Click [SmartDeviceMonitor] in the [Other] list, and then click [OK].
O
Click [IPP].
P
In the [Printer URL] box, enter "http://(printer's address)/printer" as the
printer's address.
If the server authentification is issued, to enable SSL (a protocol for encrypted
communication), enter "https://(printer's address)/printer" (Internet Explorer
5.01, or a higher version must be installed).
(example IP address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://(printer's address)/ipp" as the printer's address.
Q
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box
becomes the IPP port name.
R
Click [Detailed Settings] to configure proxy server, IPP user name, and oth-
er settings. Make these settings, and then click [OK]. For details, see
Help on the CD-ROM.
❒ For information about the settings, see SmartDeviceMonitor for Client
Help.
S
Click [OK].
25