Ricoh Aficio AP610N Quick Installation Manual page 112

Paper and Other Media
Specifying standard size paper for the
Bypass Tray
Important
1
❒ Shuffle the paper before loading
the stack onto the tray, so multiple
sheets are not fed in together.
❒ Set the size and direction of the
loaded paper on the control panel
or with the printer driver. Make
sure the settings do not conflict.
Otherwise, the paper may jam or
the print quality may be affected.
A
Slide the side guides outward,
and load paper until it stops with
the print side up.
Note
❒ If you load A4K or larger, or
× 11 Kor larger, slide out
1
8 /
2
the bypass tray extension ( )
and then flip it open ( ).
22
B
Adjust the side guides to the pa-
per width.
Important
❒ Confirm that paper fits under
the side guides.
❒ Sheets of A4K or 8
length or longer must be loaded
one at a time. Support the paper
by hand so it feeds in properly.
Additionally, since paper feed-
ing and image quality may dif-
f e r d e p e n d i n g o n p a p e r
thickness and width, check
print results in advance using
paper you intend to print on.
ZKGY200E
Note
❒ 45 kg paper or paper of A4K or
1
8 /
2
feed in properly unless it is cut
at right angles.
AGN028S
1
/
2
x 11 K or longer may not
ZKGY220E
x 11K