Test Printing - Ricoh Aficio AP610N Quick Installation Manual

Setting Up

Test Printing

The following explains the procedure
for test printing of the configuration
page.
Test print in order to verify that the
printer is working normally. Test
2
printing checks printer performance
only; it does not test the connection to
the computer.
A
Press the {Menu} key.
The [Menu] screen appears on the
display.
B
Press the {U} or {T} key to dis-
play [List/Test Print], and then press
the {# Enter} key.
Menu:
List/Test Print
The menu for selecting the con-
tents to be test printed appears.
C
Press the {U} or {T} key to dis-
play [Config. Page], and then press
the {# Enter} key.
List/Test Print
Config. Page
28
The following message appears
and the configuration page is
printed.
Printing...
Note
❒ If printing is not normal, check
to see if an error message ap-
pears on the display. If there is
an error message, see "Trouble-
shooting", Maintenance Guide.
D
Check the options.
Note
❒ For details about the configura-
tion page, see "Interpreting the
Configuration Page", Software
AGN200S
Guide.
E
Press the {Online} key.
The initial screen appears.
Ready
AGN202S