8 Diagnostics system
Diagnostics mode can be used to check the operation of the appliance and read any alarms.
8.1 Access to diagnostics
1. The appliance must be switched OFF.
2. Switch on the appliance by turning the programme selector one position in a clockwise direction.
3. Wait until the LEDs light and the buzzer sounds a "bip", then press the key combinations according to the
model
Important: This operation must be carried out within 5 seconds!
4. Hold the keys down until the LEDs begin to flash and the buzzer sounds.
Selector in first position
(clockwise)
2008-03 ADL
30/58
599 70 66 79