Introduction; Purpose Of This Manual; Caution; Installation - Electrolux ENV06 Service Manual

1 Introduction

1.1 Purpose of this manual

The purpose of this Service Manual is to provide service engineers who already have basic experience in
repairing clothes dryers with additional technical information concerning condenser dryers with electronic
control systems.
The electronic control system consists of a main circuit board with a built-in selector and - on some models -
a liquid-crystal display (LCD). These components are supplied already assembled and tested by the
manufacturer.
This Service Manual describes the following:
Technical characteristics
Control panel
Description of operation
Structural characteristics
Electrical components and circuit diagrams
Diagnostics
Alarms
Accessibility

1.2 Caution

• Any repairs or maintenance of electrical appliances must be carried out by qualified
persons only.
• Always remove the plug from the power socket before accessing the internal
components.
WARNING

1.3 Installation

The appliance must be installed on a perfectly flat, level surface in order to ensure that the condensation
produced during the drying process is ducted correctly to the special canister.
The feet should never be removed. There must always be a space between the bottom panel of the dryer
and the floor in order to prevent possible overheating.
WARNING
2008-03 ADL
If the appliance is laid on its side for maintenance or repairs,
wait for ½ hour before operating it again.
4/58 599 70 66 79