Child Safety Function; Delicate Fabrics (½ Power); Adjusting The Spin Speed - Electrolux ENV06 Service Manual

Condenser dryer with heat pump
Hide thumbs Also See for ENV06:
Table of Contents

Advertisement

3.5 Child safety function

For all models: To enable the child safety function,
press keys 3 and 4 simultaneously and hold them
down for 5 seconds. All the keys will be disabled and
no further modifications can be entered.
To deactivate this function, press the same keys
again for 5 seconds.
3.6 Delicate fabrics (½ power)
The dryer is fitted with a heating unit consisting of two heating elements having different power ratings
(which depend on the model).
When this key is pressed once, the electronic control system switches off the low-power branch of the
heating unit, and the corresponding LED lights to indicate that this option has been selected.
If the same key is pressed again, the LED will switch off to show that the option has been deactivated, and
the low-power branch of the heating element will switch on again.

3.7 Adjusting the spin speed

This adjustment procedure tells the electronic
control system that the wash load has been spin-
dried at a certain speed and will therefore have a
certain level of humidity.
In certain programmes, this value modifies the time
required for the final drying phase.
Each time the key is pressed, the spin speed
increases by 200 rpm, from a minimum of 800 rpm
to the maximum speed for the programme selected
(the absolute maximum spin speed is 1,800 rpm).
To reset the spin speed to zero, continue to press
this key until "0" is displayed.
2008-03 ADL
9/58
599 70 66 79

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents