4.3 Operation in DELAYED START mode
After selecting the drying programme, press this key to access the delayed start option. The delay time
increases each time the key is pressed.
To cancel (reset) this option, either turn the programme selector by one position or press the DELAYED
START key until the time displayed returns to zero. The cycle is started by pressing the START/PAUSE key.
4.4 Power failure
The table below shows how the dryer reacts in the event of a power failure during a drying cycle.
Before the power failure
Programme selection (set-up)
Drying cycle
Cycle paused
Anti-crease cycle
Delayed start cycle
Delayed start cycle paused
End of cycle
"Canister full" alarm
2008-03 ADL
After the power failure
Programme selection (set-up)
Pause
Pause
End of cycle
Delayed start cycle paused
Delayed start cycle paused
End of cycle
"Canister full" alarm
16/58
599 70 66 79