Mdi/Mdi-X Port - Allied Telesis AT-FS716 Installation Manual

Product Description
LEDs
POWER
LINK/ACTIVITY
100M
FDX (FULL-DUPLEX)

MDI/MDI-X Port

Port 16/24 is associated with the MDI/MDI-X function push button.
The MDI/MDI-X push button gives you the flexibility of using a straight-through
cable to connect to a hub or another switch (Port 16/24 MDI), or to any DTE
device (Port 16/24 MDI-X), such as an end station or a server.
Port 16 or Port 24
MDI
MDI-X
4
Table 2 LED Status
Color
Off means there is no power to the switch.
Green
On means there is power to the switch.
On indicates a valid physical link on the port.
Green
Blinking indicates data is being transmitted.
Off means no link.
Off means the speed is 10 Mbps.
Green
On means the speed is 100 Mbps.
On indicates full-duplex transmission mode.
Green
Off indicates half-duplex transmission mode.
Table 3 MDI / MDI-X Push Button
To connect a hub or another switch to the port
To connect a DTE to the port
Description
Use