Fujitsu M2266S Technical Handbook page 49

M2266S/H
Technical Handbook
Packing
• Store the drive in an antistatic vinyl bag with a dessicant (silica gel).
• It is recommended that you use the same cushions and packages as those
used at delivery. If those cannot be used, use a package with shock
absorption so that the drive is free from direct shocks. In this case, fully
protect the PCAs and interface connectors so that they are not damaged.
• Indicate "This Side Up' and "Handle With Care" on the outside of the
package so that it is not turned over.
Storage
• Provide vapor-proof packaging for storage.
• The storage environment must satisfy the requirements specified in
Table 5.3 (Environmental Specifications).
To avoid condensation, avoid rapid changes in temperature.
Connections
Figure 3 1 shows examples of connections between the host system and the
IDD. Up to eight devices, including the host adapter, IDD, and other SCSI
devices can be connected to the SCSI bus in arbitrary combinations. Install a
terminating resistor on the host adaptor and on either the last device in the
chain or at the end of the cable.
See Connectors' in section 2 for the cable connection requirements and
power-cable connections.
3-2 FS810125-01 . . . A Fujitsu America, Inc.