Fujitsu M2266S Technical Handbook page 76

M2266S/H
Technical Handbook
Table 5.3 SCSI Functional Specifications (6 of 10)
Command
(Group 0)
Mode Select (15)
*
Page 7: Verify Error Recovery
* (24B:Savable)
EER (Enable Early Recovery
(Changeable)
PER (Post Error)
* (Changeable)
DTE (Disable Transfer on Error) * (Changeable)
OCR (Disable Correction)
* (Changeable)
Retry Count on Verify
* (Changeable)
Correctable Bit Length on ECC
* (Unchangeable)
Time Limit on Recovery Processing -
Page 8: Caching Parameters
* (12B:Savable)
MS (Multiple Select)
* (Changeable)
WCE (Write Cache Enable) -
RCD (Read Cache Disable)
* (Changeable)
Demand Read Retention Priority -
Write Retention Priority -
Disable Prefetch Block Number
(Changeable)
Min. Prefetch (Changeable)
Max. Prefetch
(Changeable)
Max. Prefetch Ceiling Block Number (Changeable)
Page 21: Additional Error Recovery [VU]
(4B:Savable)
DCED (Disable Command Execution Delay) (Changeable)
PSER (Post SCSI Error)
* (Changeable)
Retry Count on Seek Error
(Changeable)
EOR (Enable Overrun Report Flag) -
Retry Count on Overrun
-
Page 22: Reconnect Timing
[VU] * (4B:Savable)
Reconnect Timing on Read -
Reconnect Timing on Write -
Reserve Unit
(16)
*
3rd Party Reserve Function *
Extent Reserve Function -
- Superseding Reserve Condition Function
*
VU: FUJITSU unique function
* Supported, - Not supported
5-8 FS810125-01 . . . A Fujitsu America, Inc.