- Outline of problem
- Issued commands and specified parameters
- Sense data
- Other error analysis information
Save data stored on the disk drive before requesting repair.
Fujitsu America does not assume responsibility if data is
destroyed during servicing or repair.
See section 3 for notes on packing and handling when returning the disk
The revision number of the disk drive is represented with a letter and a
number indicated on the revision label attached to the DE. Figure 6.1 shows
the revision label format. Numbers marked by crossed lines indicate
implemented revisions. e.g. revision B3 is shown below.
SER. NO. XXXXX DATE I9XX-XX.
RATING +12V, +5V
REV. NO. A
B+= 4 5 6 7 8 9
Figure 6.1 Revision Label
Table 6.2 lists the two printed circuit boards can be replaced to assist in
diagnosing and repairing the drive. Replacement boards are preadjusted at
the factory and do not require further adjustments after installation.
FS810125-01 . . . A
Fujitsu America, Inc.