Table of Contents
Advertisement
M2266S/H
Technical Handbook
Section 2. Installation Requirements
Introduction
Installation of the M2266S/H disk drive is a two-part process:
• Mechanical and electrical installation of the hardware
• Performance of the software procedures needed to bring the device to
operational readiness.
This section contains information on the requirements for hardware
installation, including the physical dimensions that assist in mounting the
device, the cabling schemes, and information on how to set the jumpers.
For specific information on installing the drives, see section 3. For
information on software installation of the drive in a Personal Computer
environment, see section 4.
Outer Dimensions
Figures 2.1 to 2.4 show the exterior dimensions of the IDD and the positions
of the holes for the IDD mounting screws.
Notes:
1. Dimensions are in mm.
2. The depth does not include the dimension of the hook for mounting
the cable on the interface connector.
Fujitsu America, Inc.
FS810125-01 . . . A
2-1
Advertisement
Table of Contents
