Adjustment To The Child`s Height; Adjusting The Headrest; The Best Position In The Car - CYBEX SOLUTION Q2-FIX User Manual

e
h
8
e
f

ADJUSTMENT TO THE CHILD`S HEIGHT

A headrest can only provide the best protection and comfort for
your child if optimally adjusted. Only then it can guarantee that
the diagonal belt (f) is positioned optimally. The height of the
headrest and the width of the shoulder wings can be adjusted in
11 possible positions.
NOTE! The shoulder wings of the CYBEX Solution Q2-fix are
connected with the headrest and do not have to be moved
separately. If you can fit two fingers between the headrest and the
child's shoulders, the headrest has been adjusted properly.

ADJUSTING THE HEADREST

• Place your child in the child seat.
• Pull the adjustment handle (h) up in order to unlock the
headrest (e).
• Push the headrest (e) into the desired position.
• As soon as you release the adjustment handle (h), the headrest
(e) locks automatically.

THE BEST POSITION IN THE CAR

Without the ISOFIX CONNECT system, the CYBEX Solution
Q2-fix can be installed in all vehicles equipped with a three-point
automatic retractor belt. We generally recommend that the child
seat is installed behind the passengers seat in the rear of the
vehicle. In the front, your child is exposed to a higher risk of
injury in the event of a collision. In exceptional cases, the child
seat may be used on the passenger seat. If so, please note the
following:
• In cars equipped with airbags the passenger seat should be
pushed as far back as possible. Please ensure that the upper
point of the vehicle seat belt stays behind the belt guide of the
child seat.
• You must follow the vehicle manufacturer's recommendations.