Installation Of The Car Seat With Isofix Connect - CYBEX SOLUTION Q2-FIX User Manual

u
i
10
!
WARNING! This child seat may NOT be used in vehicles
with passenger seats that are positioned sideways. In
vehicles with backward-facing passenger seats, e.g. in a
van or minibus, the child seat may be used provided the
seat is approved to carry an adult. Please ensure that the
head rest is not removed when using the child seat on a
backward-facing passenger seat. The child seat must always
be secured with the three-point belt even when it is not in
use. This is necessary to protect the driver or passengers
from being injured by a loose child seat when making an
emergency stop or in the event of a collision.
NOTE! Please never leave your child unattended in the car.

INSTALLATION OF THE CAR SEAT WITH ISOFIX CONNECT

The safety of your child will be enhanced using the ISOFIX
CONNECT system which firmly connects the child seat to the
vehicle. Your child will still be buckled in using the car's three-
point belt.
NOTE! The car's ISOFIX anchorage points (i) consist of two
metal rings per seat, located between the backrest and the seat
cushion of your vehicle seat. If in doubt please refer to your
vehicle owner's manual. If the ISOFIX anchorage points (i) in your
vehicle are difficult to access, the upholstery in your car can be
protected by permanently attaching the supplied ISOFIX guides
(u) to the two ISOFIX anchorage points (i). In some vehicles it
is better to fit the ISOFIX guides (u) in the opposite direction. To
ensure that the CYBEX Solution Q2-fix is installed safely and in
accordance with the instructions, please note the following: