Split Reporting - GE CS5500 Programming Manual

5.5.4 Split reporting

Split reporting configures the control panel to report to two different central stations.
Some events must be reported to phone number 1 and others to phone number 2. The
control panel dials the first number twice. If it cannot reach this number, it dials the
second number twice. It performs this sequence for the number of times specified in ARC
Dial Attempts or until it reports the relevant event to each number. The same account
code is used to report to both numbers. Events for phone number 1 are enabled by
default and events for phone numbers 2 are disabled by default.
Level 1 Level 2
Phone Number Phone Number 1
Phone Number 2
Account Code Phone Number 1
Phone Number 2
Protocol Phone Number 1
Phone Number 2
Events Phone Number 1 – Alarms
Phone Number 1 – Alarm Restores
Phone Number 1 – Tampers
Phone Number 2 – Alarms
Phone Number 2 – Alarm Restores
Phone Number 2 – Tampers and Restores
Value State
123456
456789
445566
445566
SIA
SIA
Enabled
Enabled
Disabled
Disabled
Disabled
Enabled