GE CS5500 Programming Manual page 45

Event message Explanation
PA Panic Alarm A personal attack alarm has been tripped.
Panic Keypad A panic alarm generated by pressing the keys 7 and 9 on the keypad.
Partarm See Partial Arm event message.
Partial Arm Part arm of the system by a specific user.
Recent Closing An alarm occurred within five minutes of the panel being armed.
Re-exit A special feature of false alarm preventing.
Reset A user has manually reset a smoke detector.
RF Jam Restore See RF Jammed event message.
RF Jammed RF jamming.
RF Low Battery An RF transmitter has reported a low battery.
RF Low Battery See RF Low Battery event message.
Restore
Service End End of the 'Installer on-site' (service mode).
Service Start Start of the 'Installer on-site' (service mode).
Silent Panic A silent panic alarm.
Siren Tamper A siren tamper.
Siren Tamper See Siren Tamper event message.
Restore
Start Download The start of an up/download.
Start Prog Start programming. The installer entered programming mode.
Tamper A tamper.
Tamper Restore See Tamper event message.
Telephone Fault Telephone line faults.
Telephone Fault See Telephone Fault event message.
Restore
Trouble A trouble condition.
Trouble Restore See Trouble event message.
Walktest The start/end of a walktest.
Zone Inactive See Zone Inactivity event message.
Restore
Zone Inactivity A zone inactivity monitoring event.