GE CS5500 Programming Manual page 74

Term
SIA
SIA Code
Silent Auto Arm
Silent Exit
Silent Exit Always
Silent Keypad
Silent PA (7+9)
Silent panic
SIM Card Blocked
SIM Card Trouble
SIM PIN Accepted
SIM PIN Code
Single Badge
Single Event Message
Siren blast
Siren Supervision
Siren Tamper
Siren Tamper/Trouble
Siren/Phone Faults and
Restores
Sirens
Definition
The Security Industry Association format. It is an FSK 300 baud format.
SIA with Area Modifier is a version of the SIA format that sends partition
information in addition to the event information.
A special version of SIA, called XSIA, is used in Holland. XSIA combines user
names and zone descriptors with the SIA codes when reporting events. The
CSx75 range supports zone descriptors only. The zone descriptors are obtained
from the first language of the keypad with module number 192 or, in other words,
from the first keypad in the first partition.
A menu option that sets the SIA code reported for the selected zone type. (Report
Codes)
A menu option that sets the SIA code reported for the autotest event. (CS7001
GSM Module>Autotest)
A menu option that sets the SIA code reported for the bus communication error
event. (CS7001 GSM Module>GSM Options)
A menu option that arms the system automatically at a preset time without the
keypad buzzer sounding.
A menu option that prevents the exit time buzzer activating when the system is
armed or during the re-exit time. This option is activated by the user at the time of
arming and is only active during this exit delay.
A menu option that prevents the exit time buzzer activating whenever the system
is armed or during the re-exit time.
A menu option that silences the keypad's entry/exit sounder and chime only.
A menu option that prevents all audible and visual indications when a personal
attack alarm occurs.
See Silent PA (7+9)
A GSM menu option that indicates that the SIM card has been blocked and cannot
access the system.
A GSM menu option that indicates that there is a problem with the SIM card.
A GSM menu option that indicates that the PIN number for the SIM card has been
entered correctly.
A GSM menu option that displays the PIN code used to verify the user.
A menu entry that groups the functions activated by holding a proximity card once
against the proximity reader. (Badge Functions)
A menu option that sets the X-10 function sent when a proximity card is held
against the proximity reader once. (X-10 Functions)
A menu command that records a single event message. This message is sent by
the CS535 voice module and states the event that has occurred. (Recording)
A menu command that plays back a single message. (Playback)
A control panel sounder that is activated when the panel is armed, at the end of
the exit delay or when the central station receiver acknowledges the closing
report. It can also be activated for wireless arming and disarming.
A menu option that monitors the siren to detect cut wires. If the wires are cut, the
control panel sends a report to the central station.
A menu entry that groups report codes sent to the central station when a siren
tamper has occurred.
A menu option that sends a report to the central station when a CS320 power
module siren tamper or trouble condition occurs.
A menu option that sends a report to the selected phone number when a siren or
phone fault occurs. A restore report is sent when the fault is fixed. (Phone
Number)
A menu option that sends siren/phone faults and restore reports to the central
station depending on the condition of the panel dialler. (CS7001 GSM Module)
See also Panel Dialler OK Events and Panel Dialler Not OK Events
A menu entry that groups together the siren events that can be selected to trigger
an output. (Event)