OK
Hash
Navigation keys
1.3
Other methods of programming
You can use the CS5500 keypad to program the system without the menu system. This
mode uses devices, locations and segments.
To program in this mode using the CS5500 keypad:
•
•
To access this mode, select Installer Menu>Commands>Device/Location Programming.
For more information on navigating the menu, see page 9.
You can also program the system using UDx75 software. For more information, see page
16.
Press OK to:
•
Activate the menu or
•
Accept selection changes or
•
Move forward in the menu structure or
•
Complete a sequence when entering numeric data.
When editing text and phone numbers:
•
Press # F1 to move to the first character or number.
•
Press # F3 to move to the last character or number.
•
Press #
or number.
Press the navigation keys to scroll through menu lists and options.
When in multi-area mode or not in a menu:
•
Press
•
Press
When editing text and phone numbers:
•
Press
•
Press
Use the OK/Menu key instead of the * key.
Use the F2 key instead of the Exit key.
The recommended programming method is to use the menu structure rather
than devices and locations.
to delete from the current position to the last character
to display bypassed zones.
to display problem zones.
to overwrite or insert text.
to delete text.