GE CS5500 Programming Manual page 78

Term
Up/download software
Upload
User
User Card Programming A menu option that defines the access card readers that can enrol or program
User Code
User Info Request
User menu
User Names
User Phone Editing
Users
V
Version
Voice Channel
Voice Module
Voice/Siren Dial
Attempts
Volumes
W
Walktest
When Armed
When Disarmed
Window
Wireless zone
With PIN
Without PIN
Definition
Management software that can read the system programming information (upload)
or modify or replace the information if necessary (download).
The process of retrieving information from a computer running the up/download
software.
A person who is authorised to operate the alarm system. A user can operate the
system through a user device such as a keypad or keyswitch.
cards.
A four or six-digit code used to arm/disarm and access the system.
A menu command that allows the device connected to the serial port to read out
the programmed settings for a particular user. This can be activated with a PIN or
without a PIN. This is a home automation command.
See also With PIN and Without PIN
The menu displayed when a user code is entered.
A menu option that specifies a name for each user code. The maximum length of
a user name is 15 characters.
A menu option that allows the user to change the phone numbers used for alarm
reporting.
Typically, the installer programs the central station phone numbers and is the only
person who can change the number.
However, when voice protocol and siren protocol are used, the user can change
the phone number. These protocols typically report to the homeowner's mobile
phone rather than to the central station.
A menu option that specifies the zone or user number that triggers the output on
the expander module or power module. (CS507 Output Expander) (CS320 Power
Module)
A menu option that displays the current software version of the selected
component. This is available for all expansion modules, keypads and the control
panel.
A menu option that sets the voice message to be reported for the selected zone
type or event. The channel corresponds to one of the 15 pre-recorded voice
messages.
See the CS5500 Installer Manual for more information on the voice module.
See also All in Sequence
See CS535 Voice Module
A menu option that specifies the number of dial attempts (1 to 15) that the
communicator makes for voice dialing, pager or Siren Tone formats.
A menu entry that groups options to adjust levels used with the CS534 listen-in
module.
A menu option that enables walktest mode. This mode allows an authorised user
to test the detection devices and to verify that all zone inputs operate correctly.
A menu option that specifies if the selected feature is active when the system is in
an armed condition.
A menu option that specifies if the selected feature is active when the system is in
a disarmed condition.
The period of time within which an operation, function or event must occur. If the
event misses the window, the event is invalid.
See RF zone
A menu command request sent by the home automation system to the CS586
direct connect module to grant user access with a PIN number only.
Command request sent by the home automation system to the CS586 direct
connect module to grant user access without a PIN number.