Function Menu - GE NetworX NX-148E User Manual

Auxiliary Key - If programmed, you can activate the auxiliary alarm by pressing the
Emergency Activation [Auxiliary] key for two seconds. If your system is connected to a
monitoring center, an emergency report could be sent to that center. This key should
only be pressed in an emergency situation requiring response by emergency
personnel.
Police (Panic/Hold-Up) Key - If programmed, when the Emergency Activation [Police]
key is pressed for two seconds, a local audible alarm will sound. If your system is
connected to a monitoring center, an emergency report could be transmitted to that
center. These keys should only be pressed in an emergency situation requiring
immediate response by law enforcement personnel. NOTE: Some Panic/Hold-Up
alarms are programmed to be silent at the protected site while reporting an alarm to
the monitoring center. Check with your installing company to determine how your
security system will respond to the Panic/Hold-Up activation.

FUNCTION MENU

The functions listed below are found in the Function Menu.
Press r The display will now begin scrolling though a list of functions and
Step 1
the corresponding numbers associated with those functions.
Step 2 Press the number listed on the display in order to access that particular
function. Hint: If you already know the function numbers simply press r followed
by the function number.
The following list of menu selections will scroll automatically. NOTE: Some of the
functions are not listed because they are installer level functions. Each time r is
pressed the next menu item will be displayed. Press # to exit to this menu.
Select an Option
Press
ù=Zone Review
0=Set Tone
1=Master Mode
2=Service Check
3=Alarm Memory
44=Test
WWW.DIYALARMFORUM.COM
10
for Help
45=Display Test
46=Light Control
49=Español
5=User PIN
6=User Authority
7=Detector Reset
This is a sample of the display. The list
below reflects the available functions.
90=Log Review
91=View Settings
97=Set Date/Time
CHIME=Walk Test
EXIT=Silent Exit
NX-148E LCD Keypad