Regulator [B1220] (Without Opc Type) - Kubota B1220 Workshop Manual

B1220, B1620, B1820, WSM

(12) Regulator [B1220] (Without OPC Type)

Continuity Across Regulator's Terminals
1. Remove the regulator.
2. Check with a tester whether the regulator is in optimum
condition or not.
3. If the continuity is not measured as show in the table below, the
contacts of the regulator are faulty.
Check Table
NOTE
• Use a high-resistance tester as far as possible.
(1) Regulator
9-S27
ELECTRICAL SYSTEM
1 : Sky Blue
2 : Black
3 : Sky Blue
4 : Green
5 : Yellow
6 : Red
9Y1210272ELS0024US0
KiSC issued 07, 2011 A
(EU)