B1220, B1620, B1820, WSM
Meter Panel and Panel Under Cover
1. Tap out the spring pin (2) and remove the hand accelerator
lever (1).
2. Open the meter panel (3) and disconnect the hourmeter cable,
meter panel connector (6), combination switch connector (4)
and hazard switch connector (7) (Except B1220). Then remove
the meter panel (3).
3. Disconnect the main switch connector (8) and remove the panel
under cover (5).
(1) Hand Accelerator Lever
(2) Spring Pin
(3) Meter Panel
(4) Combination Switch Connector
2-S7
CLUTCH
(5) Panel Under Cover
(6) Meter Panel Connector
(7) Hazard Switch Connector
[Except B1220]
(8) Main Switch Connector
9Y1210272ENS0006US0
KiSC issued 07, 2011 A
(EU)