Disassembling And Assembling; Disassembling Clutch Housing - Kubota B1220 Workshop Manual

B1220, B1620, B1820, WSM

[2] DISASSEMBLING AND ASSEMBLING

(1) Disassembling Clutch Housing

Separating Transmission Assembly
1. Separate the transmission assembly from center frame.
(When reassembling)
Transmission case and
Tightening torque
center frame mounting bolt
Clutch Rod and Clutch Release Fork
1. Remove the clutch pedal rod.
2. Remove the external snap ring (2) at the end of clutch rod (4)
and remove the clutch release fork (3) and release bearing (5)
with release hub.
(When reassembling)
• Set the clutch release fork (3) and release hub with set spring
(1) in the correct direction.
(1) Set Spring
(2) External Snap Ring
(3) Clutch Release Fork
Clutch Shaft
1. Remove the oil seal (1).
2. Remove the internal snap ring (2).
3. Pull out the clutch shaft assembly (3).
(When reassembling)
• Apply small amount of the grease to the oil seal (1).
(1) Oil Seal
(2) Internal Snap Ring
3-S14
TRANSMISSION
63 to 72 N·m
6.4 to 7.4 kgf·m
47 to 53 lbf·ft
9Y1210272TRS0012US0
(4) Clutch Rod
(5) Release Bearing
9Y1210272TRS0040US0
(3) Clutch Shaft Assembly
9Y1210272TRS0039US0
KiSC issued 07, 2011 A
(EU)