Kubota B1220 Workshop Manual page 19

B1220, B1620, B1820, WSM
• Securely insert grommet.
(1) Grommet
• Securely clamp, being careful not to damage wiring.
(1) Clamp
(Wind Clamp Spirally)
(2) Wire Harness
• Clamp wiring so that there is no twist, unnecessary sag, or
excessive tension, except for movable part, where sag be
required.
(1) Wiring
(2) Clamp
• In installing a part, take care not to get wiring caught by it.
(1) Wiring
• After installing wiring, check protection of terminals and
clamped condition of wiring, only connect battery.
(1) Cover
(Securely Install Cover)
G-5
GENERAL
(A) Correct
(B) Incorrect
WSM000001GEG0066US1
(3) Clamp
(4) Welding Dent
WSM000001GEG0067US1
(A) Correct
(B) Incorrect
WSM000001GEG0068US1
(A) Incorrect
WSM000001GEG0069US1
WSM000001GEG0070US1
KiSC issued 07, 2011 A
(EU)