Kubota B1220 Workshop Manual page 168

B1220, B1620, B1820, WSM
3rd Shaft
1. Remove the middle shaft (6) and 19T gear (5). [If equipped]
2. Draw out the 3rd shaft (1) with 17T-13T gear (2) and shift fork
(3) with shift rod (4).
(When reassembling)
• Install the shift fork (3) and shift rod (4) as shown in the figure.
(1) 3rd Shaft
(2) 17T-13T Gear
(3) Shift Fork
(4) Shift Rod
(5) 19T Gear [If equipped]
(6) Middle Shaft [If equipped]
Separating Transmission Case and Mid Case with Differential
Case
1. Remove the external snap ring (2) and one-way clutch cum (1).
2. Separate the transmission case (4) and differential case (3).
(When reassembling)
• Apply liquid gasket (Three Bond 1206D or equivalent) to join
face of the transmission case and differential case.
Transmission case and
Tightening torque differential case mounting
nut
(1) One-way Clutch Cum
(2) External Snap Ring
3-S17
TRANSMISSION
a : Front
b : Rear
9Y1210272TRS0018US0
40 to 44 N·m
4.0 to 4.5 kgf·m
29 to 32 lbf·ft
(3) Differential Case
(4) Transmission Case
9Y1210272TRS0019US0
KiSC issued 07, 2011 A
(EU)