Kubota B1220 Workshop Manual page 87

B1220, B1620, B1820, WSM
Nozzle Holder
1. Secure the nozzle retaining nut (7) with a vise.
2. Remove the nozzle holder (1), and take out parts inside.
(When reassembling)
• Assemble the nozzle in clean fuel oil.
• Install the push rod (4), noting its direction.
• After assembling the nozzle, be sure to adjust the fuel injection
pressure.
Nozzle holder
Tightening torque Overflow pipe nut
Nozzle holder assembly
(1) Nozzle Holder
(2) Adjusting Washer
(3) Nozzle Spring
(4) Push Rod
1-S18
ENGINE
35 to 39 N·m
3.5 to 4.0 kgf·m
26 to 28 lbf·ft
20 to 24 N·m
2.0 to 2.50 kgf·m
15 to 18 lbf·ft
49 to 68 N·m
5.0 to 7.0 kgf·m
37 to 50 lbf·ft
(5) Distance Piece
(6) Nozzle Piece
(7) Nozzle Retaining Nut
9Y1210272ENS0028US0
KiSC issued 07, 2011 A
(EU)