Disassembling And Assembling; Brake Pedal [B1220] - Kubota B1220 Workshop Manual

B1220, B1620, B1820, WSM

[2] DISASSEMBLING AND ASSEMBLING

(1) Brake Pedal [B1220]

(1) External Snap Ring
(2) Return Spring
(3) Brake Rod
1. Remove the cotter pins of brake rods (3) and pull out the brake rods (3).
2. Remove the return spring (2), (5).
3. Remove the external snap ring (1) at the end of the brake pedal shaft (6).
4. Remove the pin (10) of the brake pedal, L.H. (11).
5. Remove the clutch pedal rod (9).
6. Pull the right and left brake pedals from the brake pedal shaft (6).
7. Tap out the brake pedal shaft (6) to the left, and remove it with the clutch pedal (7).
(When reassembling)
• Apply grease to the brake pedal shaft (6).
(4) Parking Brake Lever
(5) Return Spring
(6) Brake Pedal Shaft
(7) Clutch Pedal
(8) Pin
(9) Clutch Pedal Rod
5-S5
BRAKES
(10) Pin
(11) Brake Pedal, L.H.
(12) Brake Pedal, R.H.
9Y1210272BRS0018US0
(EU)
KiSC issued 07, 2011 A