Indicator And Projector State - Ask Proxima E3000 series User Manual

Dlp multi-media projector
Table of Contents

Advertisement

Appendix

Indicator and projector state

Check the indicator to know about the state of projector.
POWER
LAMP 1
Green/Red
Green/Red/Yellow
Green/Red/Yellow
--
--
--
--
--
...Green
...Green flash
58
Indicator
LAMP 2
TEMP
FILTER
Red
Yellow
...Red
State of projector
WARNING
Red
In power-off state (AC power cord not
connected).
In standby state. Press POWER to power
on the projector.
In normal working state.
(LAMP 1 lights green, LAMP 2 lights green
or LAMP 1/LAMP 2 light green at the same
time.)
Ready to be in standby mode or the
projection lamp is being cooled. Before you
power on the projector, you should wait
till the lamp is cool enough and the power
indicator flashes.
When the projector is cool enough, the
temperature is restored to the normal value
and the POWER indicator lights red, you
can turn on the projector and the WARNING
indicator stops flashing.
In suspension state.
Internal temperature too high. can't be
powered on. When the projector is cool
enough, the temperature is restored to the
normal value and the power indicator is
illuminated red, you can then power on the
projector (The WARNING indicator keeps
on flashing).
Can't be powered on because error is
detected. You should unplug the power
cord. Then insert it again and power on
the projector. If the projector is powered
off again, you should cut off the power and
contact the local distributor or repair center.
In this case, stop the projector. Otherwise,
electric shock or fire may occur.
The service life of the filter is over. You
should replace it with a new one in time.
Lamp 1 abnormal. Please cut off the power
supply and contact your dealer or service
center for repair and testing.
Lamp 2 abnormal. Please cut off the power
supply and contact your dealer or service
center for repair and testing.
The service life of the lamp 1 is over. You
should replace it with a new one in time.
The service life of the lamp 2 is over. You
should replace it with a new one in time.
...Red flash
...Yellow
...Off

Advertisement

Table of Contents
loading

Table of Contents