Basic operation
Auto setup
This function is available just by pressing the
AUTO button on the control panel or on the
remote control. The system then automatically
performs various settings in the setup menu,
including input source search , auto pc adjust
and auto focus.
Control panel
AUTO
Keystone correction
This projector can correct horizontal/vertical
keystone distortion and corner keystone
distortion.
If a projected picture has keystone distortion,
follow the steps below to manually correct the
image.
Press KEYSTONE button and buttons
on the remote control to correct horizontal/
vertical keystone distortion.
Press CORNER button and buttons
on the remote control to correct corner keystone
distortion.
Keystone adjustment can be stored.
Horizontal / vertical keystone correction:
Reduce the upper
width with button.
Corner keystone correction:
Press button
to correct upper left
keystone distortion.
24
Reduce the lower
width with button.
Press button to
correct upper right
keystone distortion.
Remote control
AUTO
CORNER
Keystone
● The arrows are white when there is no
correction.
● The arrows that are used for correction turns
red.
● The arrows disappear at the maximum
correction.
● If you press the KEYSTONE button on the
remote control once more while the keystone
dialog box is being displayed, the keystone
adjustment is canceled.
● The adjustable range can be limited
depending on the input signal.
● Press CORNER button to enter corner
keystone correction, press OK button to
switch the corrected corner.
Reduce the left
width with button.
Press button to
correct lower right
keystone distortion.
KEYSTONE
Reduce the right
width with button.
Press button
to correct lower left
keystone distortion.