Computer System Select - Ask Proxima E3000 series User Manual

Computer input

Computer system select

The projector automatically tunes to various types of computers with its function of Multi-scan system and
Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically detects the
signal format and tunes to project proper images without any additional setting.
One of the following messages may appear when:
When the projector cannot recognize
Auto
the connected signal conforming to
the provided PC systems, Auto is
displayed on the System Menu box
and the Auto PC Adjustment function
works to display proper image. If the
image is not projected properly, a
manual adjustment is required.
There is no signal input from computer.
-----
Check the connection between your
computer and projector.
Select computer system manually
The system can also be selected manually.
1 Press MENU button on the top control or remote
control to display the on screen menu.Press
 button to select the input source icon, and
press or OK button.

2 Press button to select System and press

the ► or OK button.
3 Press button to select your required

system, and then press the OK button.
√ Note:
When HDMI 1, HDMI 2, HDMI 3, Display Port , DVI, Card Reader or USB Autorun is selected, System
menu is disable.
30
Input
Network
Card Reader
USB Autorun
System
Exit - - - - Move
The PC system menu displays the selected
system.
Input
System
1024x768@60
1366x768@60
- - - -
- - - -
- - - -
Exit - - - - Move
1024x768@60
Next Next
VGA 1
Next Next