Table of Contents
Advertisement
ZIGBEE Networking Instructions
Computer configuration
■Note: For the first networking, you have to complete the PC configuration before power-on the
projector. Such limitation will be disabled upon successful networking.
Please run as Administrator when operating in the WIN7 or WIN8 system.
1. Connect the zigbee antenna (provided) to the ZIGBEE port.(page 8)
Insert the USB wireless adapter(provided) into PC, and a prompt appears in the lower right
corner of the PC, as shown below:
2.1. Install the driver, as shown below.
Open file "CP210x driver" in the CD ROM supplied with the projector, double-click "PreInstaller.
exe" under "CP210x driver" and click "Install" as below:
2.2 After clicking "Install", a prompt box of "Installation Successful" displays. Click OK and the
driver installation is completed, as shown below:
76
OK
Advertisement
Table of Contents
