Indicator And Projector State - Ask Proxima E2465 User Manual

Indicator and projector state

Check the indicator to know about the state of projector.
LAMP
POWER
REPLACEMENT
green/red
Orange
...Green
..Flash green
Indicator
WARNING
LENS
TEMP
Blue
red
...Red
...Flash red
State of projector
W-LAN
Green
In power-off state (AC power cord not connected).
In standby state. Press POWER to power on the
projector.
In normal working state.
Ready to be in standby mode or the projection
lamp is being cooled. Before you power on the
projector, you should wait till the lamp is cool
enough and the power indicator flashes.
In suspension state.
Internal temperature too high. can't be powered
on. When the projector is cool enough, the
temperature is restored to the normal value and
the power indicator is illuminated red, you can
then power on the projector (The WARNING
indicator keeps on flashing).
W h e n t h e p r o j e c t o r i s c o o l e n o u g h , t h e
temperature is restored to the normal value and
the power indicator is illuminated red, you can
then power on the projector, At the time, the
WARNING indicator stops flashing.
Can't be powered on because error is detected.
You should unplug the power cord. Then insert it
again and power on the projector. If the projector
is powered off again, you should cut off the power
and contact the local distributor or repair center.
In this case, stop the projector. Otherwise, electric
shock or fire may occur.
The service life of the lamp is over. You should
replace it with a new one in time.
Wireless network is available.
Moving lens, focusing or zooming.
...Orange
...Off
Appendix
...Blue
57