Ask Proxima E3000 series User Manual page 36

Computer input
Advanced
This function is used to set the horizontal/
vertical position and quantities of the projector
in image segment and mosaics.
Press  at "Advanced" to enter the advance
menu. press button to select the item and
press  button to set the value.
H total: set the total quantities of the projector
at horizontal direction. Image will be
segmented by vertical direction. setting
value from 1 to 512.(WXGA mode:
1-640)
V total: set the total quantities of the projector
at vertical direction. Image will be
segmented by horizontal direction.
setting value from 1 to 384.(WXGA
mode: 1-400)
Position H: set the horizontal position of the
projector. Setting range: from 1 to the
total quantitiy of projectors at horizontal
direction.
Position V: set the vertical position of the
projector. Setting range: from 1 to the
total quantitiy of projectors at vertical
direction.
Digital zoom +
After you select the digital zoom +, the on-screen
menu will disappear, while the information on digital
zoom + appears. You can press Select to zoom in the
image size, and press ▲▼◄►to move the image
horizontally and vertically.
The moving is effective only when the image is larger
than the size of the screen.
You can also press D.zoom +or select on the remote
control to zoom in the projected image.
Digital zoom -
After you select the digital zoom -, the on-screen
menu will disappear, while the information on digital
zoom - appears. You can press Select to zoom out the
imag size. You can also press D.zoom - or select on
the remote control to zoom out the projected image.
To exit the "digital zoom +/-"mode, press any button
except the D.ZOOM+/- and the OK button. To return
to Normal size, select " Screen" in the menu to adjust
screen size, or enter a new input source in the menu
"Input". Or use keys▲▼ for digital zoom to adjust the
screen size.
36
Note:
 Resolution decides the H total and V total.
When resolution is 1024x768, H total from
1-512, V total from 1-384;
When resolution is 1280x800, H total from
1-640, V total from 1-400.
• Advanced item in screen menu for only VGA
1 input is enable.
Note:
• The projector does not support images
with resolution higher than 1920*1200. If the
resolution of your PC screen is so, please
reset to lower before connecting to the
projector.
• Image data other than XGA (1024 x 768) will
be modified to those applicable to the screen
size in the initial mode.
• If no signal is detected in the PC system
menu, options of True, Full, and Digital
zoom + are not available.