Lan Control Instruction - Ask Proxima E3000 series User Manual

Dlp multi-media projector

Hide thumbs

Table Of Contents

Table of Contents

Function : PC controls projector via LAN.

Preparation:

1. Equipments: PC, projector, cables

2. Connection procedures:

Connect the projector to routers or switches of the LAN by direct or cross cable. If it fails to

connect PC and projector by parallel cable, please switch to cross cable as suggested.

3. After the computer is booted and the projector is plugged in, indicator lights of LAN interface

and computer interface will flash continuously.

Operation procedures:

1 Turn on the projector.

2 Obtain network address. DHCP set is displayed as on and obtain network address

automatically. If familiar with network, you can set DHCP as close and obtain network

address manually.

3 Enter network settings menu.

(1) Press MENU button on side control

or remote control to display screen

menu. Press  button to select

network icon.

(2) Press OK or  button to enter the

network menu.

(3) Press  button to select Network

settings and press OK button.

(4) Press  button to set DHCP as

"On".

(5) Press  button to "Set" and

press OK button."Please wait..."

appears.

 Note:

When connecting to wireless network,

please check the SSID/ESSID and IP.