Terminals - Ask Proxima E3000 series User Manual

Part names and functions
①

Terminals

㉑
⑳
① USB-A
Connect A type USB device (e.g. USB flash drive) to this
terminal (Support FAT File System).
② USB-B
Connect one end of B type USB cable to this terminal
and the other end to a computer to project the computer
screen.
③ HDMI 3
Connect digital output signal from HDMI to this terminal.
④ DVI
Connect the DVI digital output signal to this terminal.
⑤ DISPLAY PORT
Connect output signal from DISPLAY PORT to this terminal.
⑥ HDMI 1
Connect digital output signal from HDMI to this terminal.
⑦ HDMI 2
Connect digital output signal from HDMI to this terminal.
⑧ RGB 1 IN
Connect VGA output signal from computer to this terminal.
⑨ LAN
- When using wired network to control and operate the
projector, connect the wired network cable to this terminal.
- Project images from a computer connected to this terminal
with wired network cable.
⑩ RGB 2 IN/RGB OUT
- Connect VGA output signal from computer to this terminal.
- Output the signal from ⑧ or ⑫ to other monitor.
⑪ VIDEO IN
Connect video output signal from video equipment to this
terminal.
8
② ③ ④
⑲ ⑱
⑰ ⑮
⑯
⑤ ⑥ ⑦ ⑧
⑭
⑬ ⑫
⑫ BNC/Y/Pb/Pr
- Connect RGBHV (5BNC) signal to R, G, B, H and V jacks
respectively.
- Connet component video signal to this jack.
⑬ S-VIDEO
Connect S-Video signal to this jack.
⑭ RS232 IN
When using RS-232C serial commands to control or operate
the projector, connect the serial cable to this terminal.
⑮ RS232 OUT
Connect this terminal and RS232 IN terminal of other
projectors with serial cable to control or operate multi
projectors with RS232C serial commands.
⑯ REMOTE IN
When using wired remote control, connect the wired remote
control cable to this port.
The wireless remote control is disable after inserting the
wired remote control cable.
⑰ REMOTE OUT
When using this output port, the output is completed by
connecting the wired remote control cable to the wired
remote control input port of another device.
⑱ AUDIO INPUT 5/MONO
- Output the audio from video equipment connected
.
to ⑪ ⑫ or ⑬
,
- For a mono audio signal (a single audio jack), connect it to
L(MONO) jack.
⑲ AUDIO INPUT 1/2/4
- Output the audio from USB or DVI equipment connected
to ① , ② or ④ to AUDIO INPUT 1/2/4 respectively.
⑳ Antenna
When using zigbee, connect the antenna to this port to
reveive and transmit zigbee wireless signal.
㉑ AUDIO OUT
Oupt the audio signal form ⑱ or ⑲ .
⑨
⑩
⑪