Ask Proxima E3000 series User Manual page 72

Dlp multi-media projector
Table of Contents

Advertisement

LAN Control Instruction
4 Check IP address
Enter network menu and select network information. Press SELECT to check IP address.
5 Input the IP address into the address bar.
Format: http:// IP address/.
(If wireless network is used, please open the wireless connecting in computer, find the
SSID displayed in "Network information", then input the IP address abtained from "Network
information" into the address bar.)
6 Select "Admin" to login the Network Display System page.(Both the initial name and passwords
are "admin".)
7 Items in Network Display System page including: System Status, General Setup, Network Setup
and Presenter setup.
System Status: Display the network status of the projector. ( Wired LAN as example)
General Setup:
"Change Password for Webpage": change the login password of admin.
"Power": turn on or turn off the projector via network.
"Source Select": select the input signal source. (Note: If you use ProjectorMe software to project
images, Network must be selected in Source Select.)
72

Advertisement

Table of Contents
loading

Table of Contents