Indicator And Projector State - Ask Proxima E1655U Owner's Manual

Indicator and projector state

Check the indicator to know about the state of projector.
Indicator
POWER WARNING LAMP
(Green/red) (Red) (Yellow)
green
green flash
*When the projector bulb reaches its endurance, the indicator light will be yellow and you need to
change the bulb.
FOCUS
SHIFT
(Green)
(Blue)
?
red
red flash
State of projector
Is in power-off state (AC power cord not
inserted).
Is in standby state. Press ON/STNADBY to
power on the projector.
Is in normal working state.
Is ready to be in standby mode or the
projection lamp is being cooled. Before you power
on the projector, you should wait till the lamp is cool
enough and the power indicator flashes.
Is in suspension state.
Internal temperature too high. can't be
powered on. When the projector is cool enough, the
temperature is restored to the normal value and the
power indicator is illuminated red, you can then
power on the projector (The indicator Warning Temp
keeps on flashing).
When the projector is cool enough, the temperature
is restored to the normal value and the power
indicator is illuminated red, you can then power on
the projector, At the time, the indicator Warning
Temp stops flashing.
Can't be powered on because error is
detected. You should unplug the power cord. Then
insert it again and power on the projector. If the
projector is powered off again, you should cut off
the power and contact the local distributor or repair
center. In this case, stop the projector. Otherwise,
electric shock or fire may occur.
The service life of the lamp is over. You should
replace it with a new one in time.
Lens is moving and being adjusted.
Focus being adjusted.
blue
?
57
Appendix
off
yellow