Screen Size Adjust - Ask Proxima E3000 series User Manual

Screen size adjust

The screen size can be reset to the value as
you desire.
1 Press MENU button to display the screen
menu. Press  button to select screen icon
and then press  or OK button.
2 Press  to select your required item and
then press OK button.
Normal
To project images in the same aspect ratio with
the input signals.
Wide
To provide an image with an aspect ratio of
16:9 by expanding the image width uniformly.
True
Provide images in original size. When the
original image size is larger than the screen
size XGA (1024x76) or WXGA (1280x800),
the projector enters display area selection
mode automatically. Press  to select
a display area. The arrow turns red upon
adjustment and disappears upon the maximum
limit.
Full
To provide an image to fit the screen.
Custom
Adjust the proportion and position of the screen
manually.
When selecting this item, press  and the
corresponding interface appears on the screen.
Press  button to adjust your required item.
H/V scale: Adjust the horizontal/vertical screen
scale.
H&V: When set to "On", the aspect ratio is
fixed. The Scale V appears dimmed and
becomes unavailable. Adjust Scale H, and
then the screen scale is automatically modified
based on the aspect ratio.
H/V position: Adjust the horizontal/vertical
screen position.
Common: Save the adjusted scale to all the
inputs. Press OK at Common to display a
confirmation box. To save the scale, press OK.
When Custom is selected, the saved scale is
used.
Reset: Reset all the adjusted values. Press OK
at Reset to display a confirmation box. To set,
press OK at "Yes".
Remote control
OK
Screen menu
Screen
Normal
Wide
True
Full
Custom
Advanced
Digital zoom +
Digital zoom -
- - - -
Exit Move
Computer input

SCREEN
Next Next
35