Ask Proxima E3000 series User Manual page 79

5.1 . Power on the projector, press MENU button on the remote control to displaty screen menu.
Press  button to select Network ico.n, then press  button to select "Zigbee Setting"
and press "OK" to enter, as shown below:
5.2 Set "Zigbee Mode" to "On", and press "OK" button on remote control. Set "PAN ID" to "7" ,
identical to the PC "PAN ID" and press "OK" button on remote control, as shown below: (Power
off and then power on the projector again)
5.3 Connect network by selecting "Join Zigbee Network" in projector menu and pressing OK
button on remote control, as shown below:
Network
Network setting
Network information
Zigbee setting
Exit Back Move
Network
Zigbee setting
Zigbee mode
PAN ID
Join Zigbee network
Exit Back Move
Network
Zigbee setting
Zigbee mode
PAN ID
Join Zigbee Network
Exit Back Move
ZIGBEE Networking Instructions
Next Next
On Off
7
- - - - Next
On Off
7
- - - - Next
79