Ask Proxima E3000 series User Manual page 85

9.3 Adjust the lens up/down/left/right, focus and zoom under "LenszShift" , as well as KeyStone
and corner under "KeyStone" of the two projectors to achieve a integration band registration
of two projectors, as shown below:
9.4 Set "Width of the horizontal inteoration" for the two projectors to 150 (the default value of
horizontal integration band width is 150, and the default value of vertical integration band
width is 100. For this is horizontal blending, without using vertical integration band, it needs
not to set the vertical integration band width). Click "Save and refresh fusion data" to view
projection effect. "Gamma" value may be adjusted based on the effect. Click "Save and
refresh fusion data" whenever setting value, as shown below:
ZIGBEE Networking Instructions
85