Ask Proxima E3000 series User Manual page 46

Advanced setting
Keystone
This function is used to store or reset the keystone correction when the AC power cord is
unplugged. Press  to select the itmes below:
Keystone:
Store...............Store the keystone correction even when the AC power cord is unplugged.
Reset .............Reset the keystone correction when the AC powercord is unplugged.
H/V Keystone ...Press  to correct keystone distortion in horizontal and virtical position.
Corner............... Press CORNER and  buttons on remote control to correct corner
keystone distortion.Correcting order is as followings:
upper-left→ upper-right → lower-right → lower-left→...
Press  to correct the upper-left corner keystone distortion.
Press  to correct the upper-right corner keystone distortion.
Press  to correct the lower-right corner keystone distortion.
Press  to correct the lower-left corner keystone distortion.
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo with Logo select, Logo PIN code lock and
Logo PIN code change functions.
Logo select
This function decides on the starting-up display from among following options.
Default .... Show the factory-set logo.
Off ........... Show the countdown display only.
Logo PIN code lock
This function prevents an unauthorized person from changing the screen logo.
Off ...... .....The screen logo can be changed freely from the Logo Menu.
On ...... .....The screen logo cannot be changed without a Logo PIN code.
If you want to change the Logo PIN code lock setting, press the OK button and the Logo PIN code
dialog box appears. Enter a Logo PIN code by following the steps below.
Password resetting
Press ▲▼ button to enter a number. Press ► button to fix the number and move the red frame
pointer to the next box. The number changes to "*". If you fixed an incorrect number,press ◄
button to move to the number you want to correct, and then press▲▼button enter the correct
number.
Repeat this step to complete entering a three-digit number.
After entering the three-digit number, move the pointer to Set. Press the OK button so that you can
start to operate the projector.
If you entered an incorrect Logo PIN code, Logo PIN code and the number (***) will turn red for a
moment. Enter the correct Logo PIN code all over again.
Change the Logo PIN code lock setting
Use the Point ▲▼ buttons to switch No or Yes , and then press the OK button to make a choice.
Logo PIN code change
Logo PIN code can be changed to your desired three-digit number. Press OK button to select Logo
PIN code change. Logo Pin code dialog box appears, press ▲▼ buttons to enter the correct code.
The New Logo PIN code input dialog box appears. Set a new Logo PIN code, confirmation box
appears, choose yes to set the new Logo Pin code.
Be sure to note the new Logo PIN code and keep it on hand. If you lost the number, you could no
longer change the Logo PIN code setting.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE
IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAGE 65, AND KEEP IT SECURELY.
SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED.
46