Computer System Selection - Ask Proxima E1655U Owner's Manual

Computer system selection

The projector automatically tunes to various types of computers with its function of Multi-scan system and Auto PC
Adjustment. If a computer is selected as a signal source, the projector automatically detects the signal format and
tunes to project proper images without any additional setting.
One of the following messages may appear
Auto
when:
The projector cannot recognize the signal
beyond the signal format table, "Auto" is
displayed on the PC System Menu icon and the
Auto PC Adjustment function works to display
proper images. If images are not projected
properly, adjust manually.
There is no signal input from computer. Check
-----
the connection between your computer and
projector.
Selecting computer system manually
The system can also be selected manually.
1. Press the F.MENU button to display the full screen menu. Use the ▲▼ buttons to select the input source icon,
and press ► button or SELECT button.
2. Use the ▲▼ buttons to select System (Signal format), and press ► button or SELECT button.
3. Press the ▲▼ buttons to select your required system, and then press the SELECT button.
VGA system menu
HDMI
DVI
Computer 1
Computer 2
Component
S-video
Video 1
Video 2
RGBHV
SCART
System
Exit
MENU
The PC system menu displays
the selected system.
29
Computer input
Input
Input
Move Next Next
SELECT